The Correct Procedure To Reset Brother Hl L2360dw Toner

The Correct Procedure To Reset Brother Hl L2360dw Toner
February 10, 2021 No Comments Brother Printer Support admin

Brother Is A Japanese Brand Popular For Manufacturing Phenomenal Printers On A Budget. Brothers Offer A Gamut Of Printers Suitable For Household, Professional, Or Office Work. If You Are Seeking A Good, User-Friendly Printer That Doesn’t Cause A Hole In Your Pocket, Then You May Consider Brother Printers.

If You Are A Proud Owner Of A Brother Printer, You Know Very Well That The Ink Cartridges Need To Be Replaced At Regular Intervals. This Replacement Is Needed Either When The Ink Levels Are Depleted Or Due To A Long Period Of Inactivity, The Ink In The Cartridges Dry Up. At Times, You Might Incur Some Issues Once The Cartridges Are Replaced And The Solution To These Issues Asks To Reset Brother Hl L2360dw Toner. If You Are Seeking The Correct Procedure To Do The Same, Given Below Is The Same.

The Procedure For Brother Hl-L2360dw Drum Reset

The Procedure For Brother Hl-L2360dw Toner Replacement Is As Follows:

  • Remove The Front Cover Of The Printer And Let It Be Open While Executing The Below-Mentioned Steps.
  • Switch Off The Printer And While Doing So Press The ‘Go’ Button.
  • Let Go Of The ‘Go’ Button After Halting For At Least 3 Seconds.
  • The USER MODE Shall Appear.
  • Press The ‘Go’ Button Nine/ 9 Times.
  • The LED Adjacent To The Wi-Fi Option Shall Flash Once.
  • Tap The ‘Go’ Button Five Times.
  • Close The Cover.
  • Congrats, The Brother Hl L2360dw Toner Cartridge Is Reset.

Thereafter, Tap The Ok Button 3 Times. It Shall Print A Status Page That Shall Contain The Message That The Toner Is Rest 100%.

In Case, Any Issue Persists Or You Find The Procedure Complicated To Execute, It Is Recommended To Reach Out To The Brother Printer Support Number For Quick Fixing Of Your Issues. The Executives Have The Adroitness To Resolve Any Kind Of Printer Related Issue Like Brother Printer Offline, Etc.

FAQs

To Tackle The ‘Toner Life End’ / ‘Replace Toner’ Message On Brother DCP, MFC, And HL Color Printers, You Need To Reset The Toner. For Doing So, You Need To:

  • Eject The Toner Entrance Door.
  • Tap The ‘Clear/Back’ Button To Navigate To The ‘Reset Menu’
  • In The Reset Menu, You Can Locate The Reset Options For Your Printer’s Toner Cartridges.
  • Open The Access Door Of The Printer.
  • Tap The Clear / Back Button.
  • Press The * Button Followed By 0 Buttons.
  • Set The Front Cover. This Shall Remove The ‘Toner Low’ Error And Shall Let You Enjoy Uninterrupted Printing.
  • To Reset The Brother Printer Drum

  • Open The Front Cover.
  • Ensure The Machine Is Switched On.
  • Tap Settings > All Setting
  • Select Machine Info. Or Machine Information => Parts Life.
  • Tap And Hold Drum Or Drum Life Until The Machine’s Display Message Alters.
  • Press Yes Followed By The Home Icon.
  • This Issue Emerges Usually When The Printer Is Without A Chip. Not Having A Chip, Hampers The Drum Unit To Communicate With The Brother Printer. Hence, You Will Be Prompted With The “Replace Drum” Message As The Printer Presumes That There Isn’t A Drum Unit.

    Tags
    About The Author

    Leave a reply

    Your email address will not be published. Required fields are marked *